Please help improve my water pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Please help improve my water pump

    I don't know how to start a new topic on this website, so I'm so sorry for making a reply here that starts a new topic. Can anyone please help me?

    I have an 8W 240V water pump that needs to work 24/7. So far what I only have are 100W panel, solar charge controller, 50A 12V deep cycle battery, and inverter. What I have will only last me 3 days max. Is there a way to add/change some parts to make the pump fully function 24/7 without failure? (the less costly, the better)
  • Mike90250
    Moderator
    • May 2009
    • 16020

    #2
    You need both more battery and to recharge it, more panel.

    Our question is, How many cloudy days to you need this to run for ? Generally systems are designed for 2-4 days of clouds, and day 3, the generator is started so as to not overly deplete the battery. If you say 8 days, you will need a much much larger system.

    8 watt pump That would not need a very large inverter, a 50W inverter is about the smallest you can get. For things using a motor, you should use s pure sine wave inverter, it allows the pump to run cooler. High wattage inverters (over 300w) will self-consume more power internally, than your pump does. Replacing your inverter with a high efficiency pure sine wave, may be all you need to do.

    8 watts x 24 hours = 192 watt hours
    50ah battery @ 12V = 600 watt hours stored, 50% are usable. If you have already drained the battery to shutdown, several times, the battery has had it's lifetime shortened quite a bit, so start the budget for a replacement battery

    To get a solid 3 days, you need 1200 watt hours of battery, if you don't want to damage the battery on day 3.
    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

    Comment

    • MadnessGrid
      Junior Member
      • Feb 2019
      • 8

      #3
      How can you prevent a battery from draining to shutdown? Some controllers have a function to prevent this?

      Comment

      • SunEagle
        Super Moderator
        • Oct 2012
        • 15126

        #4
        Originally posted by MadnessGrid
        How can you prevent a battery from draining to shutdown? Some controllers have a function to prevent this?
        Most charge controllers will turn off the battery at a voltage below 11V which is not good. There are other external Low Battery Relays that can be programed higher which will help extend the batteries life.

        Comment

        Working...