Tweet
I've got a SolarEdge System. I've googled and find quite a lot of people talking about their CT clamps being labelled incorrectly and/or put on the wrong way.
My consumption is wildly off. For Nov11th-Dec12th the import from the grid is under-reported by almost half, according to my gas/electricity provider and smart meter I imported 1432kwh but for the same time period according to SolarEdge I only imported 414kwh from the grid, with 243kwh from battery and 278kwh from PV. The export to the grid according to my gas/elec was 44kwh but solar edge says 6kwh
I'm wondering about the 2x CT clamps that are joined by the wago junction box. In another forum they said to twist the red/black wires more so I have. And to unbundle the black/white wires which I now have. And yes, dusty as brick dust from housing renovation.
SE_1.jpg
SE_2.jpg
My consumption is wildly off. For Nov11th-Dec12th the import from the grid is under-reported by almost half, according to my gas/electricity provider and smart meter I imported 1432kwh but for the same time period according to SolarEdge I only imported 414kwh from the grid, with 243kwh from battery and 278kwh from PV. The export to the grid according to my gas/elec was 44kwh but solar edge says 6kwh
I'm wondering about the 2x CT clamps that are joined by the wago junction box. In another forum they said to twist the red/black wires more so I have. And to unbundle the black/white wires which I now have. And yes, dusty as brick dust from housing renovation.
SE_1.jpg
SE_2.jpg
Comment