Our family extends the seasonal use of our back yard pool by about 2.5 months using a simple DIY solar heater, and the use of a commercial solar blanket.
I made a 8x4 treated plywood frame and screwed a corrugated aluminum panel ontop. I set the frame out in the yard where it gets plenty of sun and made short legs to keep it up off the ground. ($10 lumberyard items)
I ran a water connection of 1/2" PVC pipe from the high pressure end of my pool pump to an old washing machine Hot/Cold solonoid valve I had laying around.
I have 400 feet of regular black garden hose connected to that washing machine valve, and the hose is neatly coiled on that 8x4 platform I made to soak the heat from the sun.
The other end of the hose feeds trickling VERY hot water back into the pool.
The washing machine valve is on a timer so it shuts off when the sun's output isn't enough to make a difference. (At night, or early/late in the day according to season).
I check the system every couple weeks at the beginning and ending of the season to adjust the valve timer if needed.
The system acts as a radiator if it is used at night and pours very cold water back into the pool so the flow has to be shut off at night.
If you normally shut your pump off with a timer at night then you won't need the valve.
Total initial cost was around $60 and we've been using it for about 6 years now. I can't imagine not using one with a pool, it's been very effective.
I made a 8x4 treated plywood frame and screwed a corrugated aluminum panel ontop. I set the frame out in the yard where it gets plenty of sun and made short legs to keep it up off the ground. ($10 lumberyard items)
I ran a water connection of 1/2" PVC pipe from the high pressure end of my pool pump to an old washing machine Hot/Cold solonoid valve I had laying around.
I have 400 feet of regular black garden hose connected to that washing machine valve, and the hose is neatly coiled on that 8x4 platform I made to soak the heat from the sun.
The other end of the hose feeds trickling VERY hot water back into the pool.
The washing machine valve is on a timer so it shuts off when the sun's output isn't enough to make a difference. (At night, or early/late in the day according to season).
I check the system every couple weeks at the beginning and ending of the season to adjust the valve timer if needed.
The system acts as a radiator if it is used at night and pours very cold water back into the pool so the flow has to be shut off at night.
If you normally shut your pump off with a timer at night then you won't need the valve.
Total initial cost was around $60 and we've been using it for about 6 years now. I can't imagine not using one with a pool, it's been very effective.
Comment