WANTED; Device for automatic switching on loads when enough solar is being generated

**Sunking** · 08-09-2012, 10:20 AM

If you have a grid tied system would just be a waste of money to do that as it serves no purpose.

**FurlongRob** · 08-09-2012, 01:22 PM

Originally posted by Sunking

If you have a grid tied system would just be a waste of money to do that as it serves no purpose.

Hi.
Thanks for taking the time to answer.
With respect, if the system is generating 4Kw and putting most of it back to the grid, I might as well use it FOR FREE. I still get paid the feed in tariff of 45.4p irrespective of how I use it first.

**inetdog** · 08-09-2012, 01:29 PM

Originally posted by FurlongRob

Hi.
Thanks for taking the time to answer.
With respect, if the system is generating 4Kw and putting most of it back to the grid, I might as well use it FOR FREE. I still get paid the feed in tariff of 45.4p irrespective of how I use it first.

Most feed-in tariffs are based on what you feed in rather than what you generate. Are you sure that you get paid either way? If so, you are very fortunate and you should be looking for ways to use it locally.

**FurlongRob** · 08-09-2012, 03:25 PM

Originally posted by inetdog

Most feed-in tariffs are based on what you feed in rather than what you generate. Are you sure that you get paid either way? If so, you are very fortunate and you should be looking for ways to use it locally.

Hi.
Yes FIT is paid for what's generated, irrespective of what's put back, in fact on top of that I get an extra 3.2p for 50% of what is generated in the assumption that the 50% is being put back into the grid.
So far it's been very good. See my blogspot @ http://robpendleton.blogspot.co.uk/

**Nicknack** · 08-26-2012, 02:33 PM

Solar controller

I have had a solar immersion controller fitted in my house for the past 6 months and it is working flawlessly. If any body wants me to build one for them get in touch.

**FurlongRob** · 08-27-2012, 05:13 AM

Originally posted by Nicknack

I have had a solar immersion controller fitted in my house for the past 6 months and it is working flawlessly. If any body wants me to build one for them get in touch.

Hi. thanks for the info. Yes I would be interested in your device. I have found something on the internet but currently it's too expensive. If you could give me more info, alterations to wiring etc, I'b e grateful. furlongrob@yahoo.co.uk

**Nicknack** · 08-27-2012, 05:55 AM

Hi all you need is to mount the unit next to your consumer unit. then you clip a ct around your incoming meter tails. you also need a twin socket next to you immersion controller.
you then have to pull out the cable for your immersion heater from your consumer unit and take it to the immersion controller. I am selling these for £180. Let me know if you are interested.
These are fully proportional controllers and will heat your water using 200 watts up to 3kw of spare solar power. It will automatically switch off if someone switches a kettle on or any other load in your house, so you will never import from the grid.

WANTED; Device for automatic switching on loads when enough solar is being generated

WANTED; Device for automatic switching on loads when enough solar is being generated

Comment

Comment

Comment

Comment

Comment

Comment

Comment