problem with 12vdc controller , says charging but nothing seems to be happening

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • turbo1600
    Junior Member
    • Jul 2019
    • 4

    problem with 12vdc controller , says charging but nothing seems to be happening

    how come my solar panel out put is 30vdc in full sun , without it connected up to the controller , but when i connect it up to the controller and measure the voltage at screw terminals where panel feed goes in it reads 12.6 vdc . lead acid battery is connected . it was working perfect with the same type controller , but the battery symbol had no lines in it.. ( charging state ?) so i replaced it now this is happening.
    see video : https://www.youtube.com/shorts/WjdAgFDuULs
  • SunEagle
    Super Moderator
    • Oct 2012
    • 15126

    #2
    My first question is what is the charge level of the battery? If it is more than 90% the charger may not be doing anything.

    Second question. Did you hook up the battery to the charger first and then the panel to the charger? Doing the hookup in a different order may cause the charger not to do anything.

    Finale question. What is the Amp hour rating of the battery and how many amps can the panel produce?

    Comment

    Working...